CAD.CAM

Location:HOME > CAD.CAID > Introduction

CAD.CAID

CAM-TOOL v18.13.1

cadcamaec@protonmail.com2025-07-06CAD.CAID3

CAM-TOOL addresses the needs of the Manufacturing Tooling Industry. CAM-TOOL addresses the sophisticated requirements of Mold & Die builders by offering unparalleled functionality using our powerful NC programming strategies that simply do not exist in other systems.


Whether you’re doing High Speed Machining or Hard Milling, CAM-TOOL’s integrated surfacing modeling and NC programming techniques allow the user to generate toolpath to run your NC machine “Safely & Unattended” while providing unparalleled finish quality.


CAM-TOOL has both unique surface calculation technology and common polygon calculation technology. It addresses various milling demands such as precision, surface roughness, cost-effectiveness, deep milling, hard materials. CAM-TOOL achieves high precision and optimal milling by unique algorithm of "Surface calculation".


Highly efficient rough cutting by High feed radius cutter!!

“Z-level Rough Cutting with Multiple Tools (Round 2)” enables to prevent tool vibration and breakage of inserts by unique toolpath which has no partial contacts. It maximizes tool life and reduces cutting time even in machining hard materials.



Efficient second roughing needs to recognize stock of previous process accurately. "Solid in previous process" recognizes remaining area automatically and creates efficient toolpaths. It recognizes the remaining area even from different direction.

New Function of CAM-TOOL

  • Machine simulation enhancements(Collision check in the Calculation Process List)

  • Divided CL on the Calculation Process List

  • Stock merge enhancement(Common)

  • New Plunge Rough Cutting(3D-2)

  • Curve Cutting Drive in the offset direction

  • Individual XY, Z stock setting

  • Contour Cutting, 2.5D side cutting Tapper Cutter, T-Slot Cutter

  • G01Cross Hole Drilling G01 Cross Hole drilling(SR drill)

  • Dimension feature enhancement

  • DXF Import Dimension line/ annotation

  • Component Point Rearrangement in Calculation condition sheet

  • Enhance "Work precision (Mesh width)"

  • Machine Simulation (Output overtravel information)

  • Improvement of Re-machining

  • Support PT(Tapered thread)tapping

  • Simultaneous 5-Axis Conversion (Auto)

  • Enhance High precision mode


Comment/コメント

Comment list/コメントリスト

  • No comments/コメントはありません