CSI PERFORM-3D v7.0.0

PERFORM-3D is a structural-engineering software useful for the performance assessment of structural systems.

Changes from version 6.0.0 (Released 2016-12-20):

Enhancements Implemented
207340 An enhancement has been made to allow running up to eight analysis series in parallel. The number of parallel analyses run will be reduced to physical CPU s present on the machine if less than eight in order to prevent competition that would be less efficient.
207334 The version number has been changed to v 7.0.0 for a new major release
Incidents Resolved
97373 Default locations listed in Sections 15.1.2 and 16.2.1 of the User Guide documentation have been updated to be consistent with Sections 2.2 and 2.3 of the User Guide documentation.
99896 An incident was resolved where Perform 3D v6.0.0 was unable to read in text files
100558 in the Import Structure Data task (Build Phase). This issue affected Perform 3D v6.0.0 only.
100507 An incident was resolved where the analysis could not be run on a machine that
202697 had more than 16 physical cores. When this occurred, no results were available.
202917 Where the analysis was able to run, no results were affected by this issue.

About CSI PERFORM-3D. Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis. Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational. Strength-based design considers inelastic behavior only implicitly. Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis. Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength. PERFORM-3D allows you to use displacement-based design.

PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis. If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design. However, PERFORM-3D is not intended for “design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave. PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.

Download rapidgator
https://rg.to/file/ef24092f4a5162b781c1aba77b8e9002/iCPer3Dve700.rar.html

Download nitroflare
http://nitroflare.com/view/BE32E79A9543175/iCPer3Dve700.rar