CopperCAM v25032016

Its major functions are as follows:
- Native 32 bits program for Windows 95 / 98 / ME / NT-4 / 2000 / 2003-S / XP / Vista / 7 / 8
- Import of Gerber & Excellon files, with automatic or manual alignment
- Reading Gerber RS274-X format with macros, polygon surfaces and negative polarity traces
- Management of 4 circuit layers, plus drills, plus cut-out contours, plus centering holes
- Real-time display of equipotential paths through layers
- Automatic calculation of isolation contours, simple or multiple
- Extended isolation around pads, automatic clearance with hatches
- Manual modification of isolation contours (deletion or addition with auto-snap)
- Enforcement of isolation between very close pads
- Selection of tracks to be engraved at path centre (texts, logos or references)
- Possible drills with boring cycles, reducing the number of tool changes
- Automatic calculation of board contour cut-path, with manual addition of support bridges
- Edition and correction of diaphragms for pads and tracks, one by one or grouped
- Management of a tool library and drilling strategies depending on available cutters
- G-code output, or HPGL, DXF, Isel-NCP, Roland RDGL, etc.
- Fully customisable post-processor output
- Automatic chaining to a machining driver, or output to a virtual printer driver or a COM / LPT port

CopperCAM process sequence is simple:
- Opening Gerber file containing one circuit layer
- Opening next layers (maximum 4), if any
- Detecting or plotting card cut-out contour
- Opening Excellon file for drillings, if any
- Aligning layers (automatic or manual)
- Plotting tracks that are centerline texts
- Calculating isolation contours
- Hatching zones for removing all the copper
- Checking drill tools and eventual boring cycles
- Sending output data to the driver software or to the machine

Download uploaded
http://ul.to/skqr82oq