AFT Fathom 13.0.1115 & AFT xStream 3.0.1106 & AFT Fathom 12.0.1134

AFT Fathom is fluid dynamic simulation software for engineers, used to calculate pressure drop and pipe flow distribution in liquid and low-velocity gas piping and ducting systems.

Accurately simulate individual system components and interaction
Tightly integrates equipment characteristics, analysis and output with your system’s schematic representation
Provides a wide array of features without sacrificing your need for a short learning curve
Frees you to focus on your system, not the mechanics of software manipulation
Significantly improves the quality of systems engineering you can achieve, leading to less costly, more efficient and more reliable piping systems

Capabilities
Experiment with operating conditions and scenarios
Easily change system input data, including valve positions, pump operation, control set points, pressures, temperatures and more
Import piping layouts from:
CAESAR II® Neutral files supported by AutoPIPE®, ROHR2, TRIFLEX®, and others
PCF Files supported by AutoCAD Plant 3D®, SmartPlant®, CADWorx® and others
GIS shapefiles supported by ArcGis and others
Import and export files in EPANET format
Excel integration supporting data import and export
Model a wide range of system components for both design and operational cases
Vary your system line-up: open / close pipes and valves, turn pumps on or off, set control valves to fail position
Specify alerts that automatically highlight output values that are out of range for flow, pressure, velocity, pump efficiency and more
Select pumps from online manufacturer catalogs
Compile catalogs of your frequently used piping components and select them from a drop-down list
Address the viscosity and frictional changes associated with pumping non-settling slurries and a variety of other non- Newtonian fluids
Calculate the cost of system pipes and components
Clearly import Excel data into multiple scenarios and export with the Excel Export Manager.

AFT xStream is a powerful fluid dynamic simulation tool for high-speed, acoustic transients that occur in steam and gas piping systems. Uncertainty in design and operations costs money and time. Now you can accurately simulate how your steam and gas systems will respond to potentially harmful transient events.

Simulate and Solve Your Challenging Steam and Gas Transient Problems
Accurately simulate high-speed transients in steam and gas piping systems including choked flow conditions
Evaluate overall system response and transient pipe forces after steam and gas turbine trips
Predict transient supply pressures, temperatures and flows to operating gas compressors and turbines when one trips offline
Simulate tank blowdowns and charging, and how long it takes to reach desired pressures
Predict transient pressures and flows due to heat exchanger tube ruptures
Easily change system input data including transient valve positions, compressor operation, control set points, pressures, temperatures and more
Initiate transients based on time or events in the system

Typical Applications
Ensure pressure, temperature and flow extremes are within design allowables
Determine imbalanced pipe forces for sizing structural supports
Troubleshoot existing systems to determine the cause of operational problems

AFT Fathom is fluid dynamic simulation software for engineers, used to calculate pressure drop and pipe flow distribution in liquid and low-velocity gas piping and ducting systems.

Features
- Advanced hydraulic solver
- Detailed modeling for centrifugal and positive displacement pumps
- Scenario Manager to track all design variants and operational possibilities in a single model file
- Pump vs. system curve generation including individual head curves and composite efficiency
- Thermal analysis including piping heat transfer and heat exchanger modeling
- Supports Newtonian and non-Newtonian fluids, including non-settling slurries
- Optional ChempakTM add-on utility provides a thermophysical database of almost 700 fluids

AFT Fathom add-on modules
- Settling Slurry (SSL) - models the effects of pumping fluids containing settling solids using the Wilson/GIW method
- Extended Time Simulation (XTS) - models dynamic system behavior
- Goal Seek and Control (GSC) - identifies input parameters that yield desired output values and simulates control functions
- Automated Sizing (APS and ANS) - automate the process of sizing pipelines and piping networks based on required conditions, such as maximum pressure or minimum flow, to reduce cost or weight

Download rapidgator
https://rg.to/file/90106b49cd3008ca29b4b8b5fb3d13a6/AFT.Fathom.13.v13.0.1111.Incl.Keymaker-CORE.rar.html

Download nitroflare
https://nitroflare.com/view/164C4BC470F0990/AFT.Fathom.13.v13.0.1111.Incl.Keymaker-CORE.rar