Simufact Welding v2023

Simufact Welding

Special weld structure software for virtual tests and process design for the optimisation of assemblies

Welding Process Simulation Software

Robustly simulate complex multi-station fixturing and assembly of complex assemblies with hundreds of joints. Perform a “virtual tryout” before the first part is fabricated.

Simufact Welding is used to model and optimise a variety of thermal joining processes, taking into account the welding sequence and fixture.

One of the biggest challenges in welding is the thermal deformations or residual stresses of the entire assembly that occur after a non-optimised welding and clamping process. As a result, subsequent assembly processes cannot be easily performed because the geometry of the sub-assembly is out of tolerance. With Simufact Welding, the welding process and parameters can be optimised to achieve the desired product quality.

Design and optimise your welding process:

Determine the optimal weld sequence and parameters, as well as clamping and unclamping concepts, to minimise thermal distortions and residual stresses and ensure a robust welding process.

Identify and eliminate potential welding defects, such as hot cracks.

Investigate material behavior during welding, such as phase transformation.

Knowledge

Simplicity – No CAE expert knowledge required as the software solution is designed to be user-friendly, intuitive and process-oriented.

Sustainability

Sustainability – Save material, time and money by replacing expensive and time-consuming physical tests with virtual tests.